土壤重金属污染来源及其解析研究进展

土壤重金属污染问题是环境和土壤科学研究者关注的热点问题。对土壤重金属污染物来源的鉴别是准确、有效控制和治理污染源的前提。根据近年来国内外对土壤重金属污染的相关研究报道,综述了土壤中污染物的工业、农业和交通因子三大主要来源,重点阐述了目前解析土壤重金属污染来源所运用的化学形态研究、剖面分布、同位素示踪、空间分析和多元统计等方法,并就存在的问题和今后的研究重点进行了总结。     

Production of exocellular polysaccharide by azotobacter chroococcwn

Environmental conditions affect the production of extracellular polysaccharide by Azotobacter chroococcum ATCC 4412. Production of exocellular polymer from a variety of carbon sources depended on the air flow rate. A high sucrose concentration in medium (8%) markedly favored expopolysaccharide production, which reached 14 g/L in about 72 h. In cell suspensions incubated in the presence of 8% sucrose in a nitrogen-free medium, biopolymer final concentration of 9 g/L corresponds to 68 g/g biomass. Maximum efficiency of sucrose conversion into exopolysaccharide peaked at 70% for initial disaccharide concentration of 6%. High performance liquid chromatography and gas liquid chromatography of acid hydrolysates of the exopolymer revealed the presence of mannuronosyl, guluronosyl, and acetyl residues, but not neutral sugars. The infrared spectrum corroborated the presence of carboxylate anions and O-acetyl groups in the exopolymer. Though the presence of more than one kind of polysaccharide cannot be ruled out, these data suggest that, under the experimental conditions used in this work, only a type of alginate-like exopolysaccharide is produced by A. chroococcum ATCC 4412.     

A unified set of proposals for control and design of high speed data networks

In this paper we articulate our philosophy and approach to the design and control of high speed data networks. The object is to put into perspective and to explain the coordination of various isolated pieces of detailed technical analyses that have been reported in several recent papers. In the process we summarize what we have learnt in our recent work and, also, we give indications of the direction of our future work. Our scheme integrates feedback and open loop control. The feedback control is exercised by sliding windows; access controllers regulate bursty sources. All our design proposals are rooted in asymptotic analyses; the justification for asymptotics comes from the largeness of the parameters, such as propagation delay, speed, window size, buffer size, and the number of virtual circuits. This analysis makes a strong case for operating in a specific moderate usage regime, and adaptive dynamic windowing algorithms are given that make this happen; moreover, when in this regime, buffers may be sized aggressively small without jeopardizing performance and the simplicity of the retransmission protocol. The topics in the paper are: model of communication, results on the steady-state behavior of the basic model, access control, small buffers and retransmission protocols, dynamic adaptive windows, bursty sources, and contrast with previous work.I. Mitrani's work was done while AT&T Bell Laboratories.     

A RELATION BETWEEN THE APPARENT VELOCITY AND THE SPECTRAL POWER OF SUPERLUMINAL RADIO SOURCES

It is proved that the apparent transverse velocities β_(app) and the spectral powers at 10GHz P_(10) of the cores of known superluminal sources are correlated. An interpretation ofthis result within the framework of the relativistic jet model shows that the jet Lorentzfactor γ depends on the intrinsic luminosity of the sources. The probable existence of twosubpopulations of the superluminal sources is shown by a linear regression analysis. "Small"sources f i.e. the sources without extended emission or with a distance from the core tothe outer edge of the lobe<20 kpc, show lower β_(app) than the "large" objects; this can beinterpreted as an orientation effect. Since all BL Lac objects belong to the "small" class,this result sheds new light on such a question as why these sources have lower apparent ve-locities than the "classical" superluminal quasars.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

Structural and dynamical properties of methane clathrate hydrates

Equilibrium molecular dynamics (MD) simulations have been performed in both the NVT and NPT ensembles to study the structural and dynamical properties of fully occupied methane clathrate hydrates at 50, 125, and 200 K. Five atomistic potential models were used for water, ranging from fully flexible to rigid polarizable and nonpolarizable. A flexible and a rigid model were utilized for methane. The phonon densities of states were evaluated and the localized rattling modes for the methane molecules were found to couple to the acoustic phonons of the host lattice. The calculated methane density of states was found to be in reasonable agreement with available experimental data.     

Multiple steady states in a CSTR with total condenser: Comparison of equilibrium and nonequilibrium models

Comparison of equilibrium and nonequilibrium models of a CSTR with total condenser focused on the multiple steady states and dynamic behaviour was carried out. The steady-state behaviour of the model system, MTBE synthesis from methanol and isobutene in a reactive distillation column, was studied in terms of the input parameters, i. e. feed flow rate of methanol or butenes, reflux ratio, and mass of catalyst. The dynamic behaviour of the system during the start-up was investigated and perturbations of manipulated variables were found to cause transitions between the parallel steady states. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Determination of polycyclic aromatic hydrocarbons (PAHs) in particulate matter collected with low volume samplers

The determination of polycyclic aromatic hydrocarbons (PAHs) contained in samples of particulate matter (PM), collected with low volume pumps, were carried out with an high sensitivity method that comes from several revisions of a previous method. The present work describes how, by using programmable temperature vaporization (PTV) and a mass selective detector with inert ionic source for the GC-MS analysis and the modifications of microwave-assisted extraction (MAE), the sensitivity of the method can be increased.The PAHs chosen for testing the method are: benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene (Ip) and dibenzo[a,h]anthracene (DbA). They, in fact, belong to that group of substances that are the most harmful for human health for their carcinogenicity.PAHs recoveries for spiked standard solutions at different concentrations were between 95 and 100% with relative standard deviation ranging from 1 to 3%. The revised method was validated using a 1649a urban dust standard reference material (SRM). The results obtained were in good agreement with certified values. The high sensitivity of the method allows to carry out analyses using only a half of the sampled filter (usually 47 mm diameter membranes). In this way, the other half can be used for the characterization of the other components of PM (heavy metals, organic carbon, ions, etc). The last step has been constituted by application of the optimized method on real samples collected in two cities located in Southern Italy (Bari and Taranto).     

New Experimental Insight into the Nature of Metal−Metal Bonds in Digallium Compounds: J Coupling between Quadrupolar Nuclei

Multiple bonding between atoms is of ongoing fundamental and applied interest. Here, we report a multinuclear (¹H, ¹³C, and ⁷¹Ga) solid‐state magnetic resonance spectroscopic study of digallium compounds which have been proposed, albeit somewhat controversially, to contain single, double, and triple Ga?Ga bonds. Of particular relevance to the nature of these bonds, we have carried out two‐dimensional ⁷¹Ga J/D‐resolved NMR experiments which provide a direct measurement of J(⁷¹Ga,⁷¹Ga) spin–spin coupling constants across the gallium?gallium bonds. When placed in the context of clear‐cut experimental data for analogous singly, doubly, and triply bonded carbon spin pairs or boron spin pairs, the ⁷¹Ga NMR data clearly support the notion of a different bonding paradigm in the gallium systems. Our findings are consistent with an increasing role across the purported gallane–gallene–gallyne series for classical and/or slipped π‐type bonding orbitals.     

Combustibles,fuels and their combustion products: A view through carbon isotopes

Stable (i.e. non-radioactive) carbon-isotope composition (δ¹³C) in fuels has been extensively used as an indicator of the processes leading to the generation of their parent crude-oil. With the example of those used in Paris (France), this preliminary study isotopically characterizes fuels and combustibles, as well as the isotopic relations existing with their combustion by-products, i.e. gases (CO₂) and particles (bulk carbon). Results show that δ¹³C in fuels is clearly related to their physical state, with natural gas being strongly depleted in ¹³C while coal yields the highest δ¹³C, and liquid fuels display intermediate values. This relation is also valid for combustion gases, although δ¹³C values of combustion particles form a homogeneous range within which no clear distinction is observed. Combustion processes are accompanied by carbon-isotope fractionation (noted Δ¹³C) resulting from the combustion being incomplete. Carbon-isotope fractionation is strictly negative (Δ¹³C = ?1.3‰) during the formation of combustion gases, but generally positive in particle formation even if values close to zero are observed. Using simple mixing equations for describing the closed system formed by fuel, CO₂ and carbonaceous particles, we discuss the carbon budget for spark-ignition (unleaded gasoline) and diesel engines. Stable carbon isotopes corroborate the already-proved superior efficiency of diesel combustion mode compared with spark ignition, as carbon is preferentially transformed into CO₂.